ART.35 - Belt grinding machine

Standard Equipments

• Machine respect CE stamp of compliance: - Machine with CE conformity mark made respecting the requirements of the most recent directives concerning it. - Machine complete with instruction manual complete with CE conformity certificate, test sheet and exploded view with relative spare parts list. - Machine equipped with a set of service keys suitable for the adjustment and maintenance of the machine.
• Guarantee of European standards: The stringent tests guarantee that all the requisites and standards necessary to obtain the guarantee in accordance with European standards are respected. Since the project we dedicate a lot of care and attention to making the machine with high quality level to deliver machines that last over time.
• Technical general information: - Four return wheels and rubberized drive wheel. - Particular support surface tiltable by degrees from –20 ° to + 60 °. - Possibility of processing with rigid tape and flexible tape. - Back plate behind the steel abrasive belt for working with 20 mm rigid belt. - Back plate behind the steel abrasive belt for machining with 40 mm rigid belt. - Possibility of mounting belts with a width from 25 mm to 40 mm. - Abrasive belt 40x1700 mounted on the machine ready to use. - Abrasive belt 25x1700 positioned inside the base. -Carter sander with predisposition for connection of suction system Ø80mm.

Optional Equipments

• IA-1: DUST EXTRACTOR - ONE CONNECTION: DUST EXTRACTOR kit with one suction mouth: complete of dust filter bag in flexible aluminum pipe and hose clamps. The extractor is mounted inside the base and wired to the electrical panel.TECHNICAL FEATURES- Motor: Volt 400 - Rpm 2800 - kW 0,55- Max flow rate: 1.000 m3 / h- Max total pressure: 85 mm H2O
• INV-MF: VARIABLE SPEEDS SINGLE PHASE: Single-phase inverter for electronic regulation of motor revolutions from 300 ÷ 3000 Rpm.The inverter is supplied inside box for the dust protection, which can be controlled with potentiometer.Motor with maximum power 1,1 kW.
• INT.T1: VARIABLE SPEEDS: Three-phase inverter for the electronic adjustment of moto from rpm 300 ÷ 3000 Rpm. The inverter is provided on a separate stand, inside in a dust seal box, external display for the reading of the revolutions of the nominal speed. The speed of the motor is controlled on switch boar of the machine. Motor with maximum power 2,2 kW. Notes: The inverter is dedicated to a single motor control. TECHNICAL FEATURES - Net Weight: 40 kg - Dimensions: 400x400xH.1400

Technical documentation: Manuals or product documents are available for this model.