Automated Gauge for the PP200CNC Horizontal Press Brake

Technical Features

The positioner stop for the Nargesa PP200 CNC horizontal bending press minimizes manual interventions all while increasing productivity and reducing the time it takes for positioning in different cycles:

ADVANTAGES

• Precise positioning: Powered by a 1Nm ESA servomotor and moving on high-precision linear guides and ball recirculating skids.
• ESA servomotor: Maximum capacity for specific positioning and extremely precise response to signals from the ESA S625 CNC control unlike those made by other manufacturers.
• Automatic reverse: For all operations there is a fully adjustable safety positioning gauge withdrawal movement.
• Advanced automation: Programming and control by using an ESA S625 CNC that allows manual intervention to be minimized, increasing productivity and reducing positioning times in the different cycles.
• Automatic X-axis positioning: ±0.02mm precision.
• Manual adjustment of cross-carriage on the Z-axis: Covers all operational possibilities offered by the PP200 CNC flat press, including bending, punching and curving.
• Intuitive user interface: Programming and configuration of all Positioning gauge functions are ruled by an interface designed to be simple and intuitive for the user.
• Connectivity and 4.0 technology: Enables remote connection with the Nargesa technical service through the Internet for realtime software updates, anomaly resolution and instant assistance.
• Maximum safety for the operator: Multi-speed movement together with the action on the pedal allows absolute control. Moving components are protected within the structure to avoid any risk of entrapment.
• Durability and Reliability: Structural frame made with duralumin alloys with anodizing for environmental resistance. Positioning supports in high alloy mold steel for hardness and durability. Hardox®400 slats for the most exposed area of the work table.
• Movement in two speeds: Two working speeds: maximum speed outside the safety area and a significantly slower one within this zone.
• Universal Compatibility: Compatible with a wide variety of materials, dimensions and work processes in both Metric and Imperial systems.
• Two Fingers supplied as standard with the Gauge: Flat Support (large surface for work far from the central axis) and Needle Support (thinner surface for short-wing folding, positioned between die and punch without interference).

General characteristics:

• Electric motor: Servomotor 0.9Nm, 0.520kW, 5000rpm
• Electrical power: 480V, 400V, 220V Three-Phase · 220V Single-Phase
• X axis stroke length: 1210 mm
• Z axis stroke length: 300 mm
• Displacement speed: 1000 mm/s
• Positioning accuracy: ±0.02 mm
• Repeatibility: ±0.02 mm
• Maximum structural load: 2,000 Kg
• Dimensions: 1496x1041x426 mm
• Weight: 115 Kg

Manufacturing: All products are made at facilities in Spain. Hydraulic and electronic components are standard and from leading European brands with technical assistance services worldwide (Rexroth, Bosch, Roquet, Schneider Electric, LG, Telemecanique, Pizzato, etc.).

Info

The ALL-NEW positioner stop for the Nargesa PP200 CNC horizontal bending press represents a significant advance in manufacturing efficiency and precision. Compared to the previous manual system, it enables unique and standard parts with greater precision, speed and repetitiveness. Resources are optimized to ensure maximum machine and accessory profitability with fully guaranteed operational efficiency.

• Maximum precision: Designed with mechanical precision and high-speed movement.
• Servomotor and CAN BUS communication: Controlled, rapid and constant speed with high-speed, interference-resistant real-time synchronization and resolver feedback to prevent accidental collisions.
• Brief programming: Even complex parts can be programmed in under 60 seconds.
• Drive: ESA servomotor and HTD crowned belts for automatic X-axis positioning with ±0.02mm precision.
• Manual adjustment: Cross slide (Z axis) to cover folding, punching, bending and other operations.
• Longitudinal movements: High-precision linear guides and recirculating ball runners.
• Automatic anti-collision control: Managed by the software.
• Easy installation: Mechanical and electrical installation for quick setup and operation.

Therefore, the positioner stop enhances precision and speed while increasing versatility and ease of use for bending, punching and curving operations.

Dimensions

Characteristics of the machine: 1496x1041x426 mm

Weight: 115 Kg

Tariff Item Code: 84669400

• We supply 4 eyebolts to handle the positioner stop and couple it to the horizontal bending press safely (can be coupled by several operators).
• Comes with the necessary parts to couple to the horizontal bending press.

Characteristics of the packaging Automated Gauge

Nº packages: 1

Width: 1620 mm

Length: 540 mm

Height: 460 mm

Volume: 0.40 m3

Nett weight: 115 Kg

Gross weight: 127 Kg

Tariff Item Code: 84669400

• Packaging with wooden pallet NIMF15 and 3-layered cardboard box suitable for sea freight.
• Optional: Complete wooden packaging NIMF15.

Uses

The uses for the positioner stop for the Nargesa PP200 CNC horizontal bending press are based on manufacturing efficiency and precision, mostly for bending, punching and cutting. It enables operations on different materials and profiles for versatility and efficiency, including bending plates, folding plates, punching plates, cutting plates, shaping clamps, punching holes, die-cutting, hollowing out tubes, cutting railings, widening tubes, hollowing out spouts, shortening tube ends, shaping bars, perforating plates, and more.