Electric threader for tapping M18, mod. GS 18
Description
Electric threader with reversing for precise and fast threading in holes.
The reversing function enables very short machining times: pressure on the chuck starts the slow clockwise rotation of the tool; during retraction, the fast rewinding automatically activates at 680 rpm
Simple tapping in a single operation thanks to high torque, low speed and high concentricity.
The additional handle allows optimal and comfortable use of the tool.
Compensation for angular misalignment of the cutting tool in the hole via a coupling between the shaft outlet and the threaded chuck.
Standard depth stop for blind holes.
Additional handle positioned at 90° relative to the main handle.
STANDARD EQUIPMENT
Universal connection M6 - M18 with safety clutch.
Auxiliary handle.
Depth stop.
4 mm hex key
Case.
- MAX capacity for steel tapping (S235JR): M | 18
- MAX capacity for steel tapping (S235JR) (continuous): M | 14
- MAX capacity for aluminium tapping: M | 18
- MAX capacity for aluminium tapping (continuous): M | 16
- Motor power 230 V ~ 50 Hz: kW | 0.45
- No-load speed (clockwise): rpm | 280
- No-load speed (anti-clockwise): rpm | 680
- Speed under load: rpm | 170
Related Products
Manual edge bender, roller length 110 mm, mod. SBM 110-08
Solid and robust cast-iron construction.
Price on request
Hydraulic press with electric pump, 50 t, mod. WPP 50 M
For assembly and repair work, straightening of shafts, transmissions, axles, etc.; press-fitting bearings, bolts and was...
Price on request
Edge bevelling machine, mod. KE 16-2, chamfer 15.7-18 mm
Handy and highly efficient device.
Price on request