Power Hammer PH50
Descrizione
Technical Features
The Drop Hammer PH50 Nargesa works by two cylinders, one at the back and another one at the front which is the one that impulses the stem for the stroke. The motor for the powerhammer moves the rod of the back cylinder or compressor and the compressed air goes to the front cylinder through the valves that control the stroke displacement.
- Built-in compressor.
- Maximum drop precision, controlled via a next-generation valve.
- Welded and die-cut steel frame.
- Automatic greasing system.
- Lapped cylinders designed with low-friction technology.
- Intake and exhaust mufflers.
- No need for civil engineering work or special foundations for installation.
- Automatic inner ventilation.
- Inner tray to collect greasing oil.
- Near-zero maintenance.
- Double mechanical stop protection.
- Height and orientation adjustable protection on the front.
- Drive system pedal protection.
- Electric engine protection.
- Emergency stop.
- CE marking.
- Molds manufactured and tempered in 1.2344 steel / AFNOR: Z40CDV5 / DIN: X40CrMoV5-1 / UNE: F5318 / AISI: SAE H13 / SKD61 / 45Cr5MoSiV1 to withstand major impacts and high temperatures.
- The power hammer can be moved with a forklift or a lifting hook.
- Great variety of tooling and exchangeable molds.
- Custom-manufactured molds.
Technical Features
- Nominal dropping weight: 50 kg / 110 lb
- Strokes per minute: 240
- Ram range: 180 mm / 7”
- Operating range: 220 mm / 9”
- Maximum round working capacity: 70 mm / 2.75”
- Maximum square working capacity: 60x60 / 2.36”
- Engine power: 2,2 kW / 5,5 HP
- Electrical voltage: 230/400 V three-phase 50/60 Hz
- Single-phase: 220 V voltage OPTIONAL
- Intensity: 18/10 A
- Weight: 1002kg
- Dimensions: 808x1289x1768mm
The machine is sent completely assembled.
Packaging with wooden pallet and cardboard box.
Optional: Complete wooden packing NIMF15.
All our products are manufactured in our facilities in Spain. Hydraulic and electric components are completely standard from the best European leading trademarks, with technical support all over the world: Rexroth, Bosch, Roquet, Schneider Electric, LG, Telemecanique, Pizzato etc...
Before purchasing a Power Hammer...
Before purchasing a power hammer, a few basic details are needed before making a final decision:
- BUILT-IN COMPRESSOR: The PH50 power hammer has a built-in compressor. This means, unlike with other brands, no external compressor is needed. A 50 kg or 110 lb power hammer without a built-in compressor would need a 5 HP external compressor.
- NO NEED FOR SPECIFIC CIVIL ENGINEERING FOR INSTALLATION: Only 4 holes are needed in a concrete floor to insert the 4 chemical bolts that come with the machine when installing the PH50 power hammer.
- WELDED STEEL FRAME: The machine frame is not casted; it’s made of welded and die-cut steel. This reduces the possibility of cracking, as occurs with cast power hammers.
- MAXIMUM CONTROLLED DROP PRECISION: We achieved maximum precision with the ability to even close a box of matches or position an egg and collide with it without breaking it.
- LAPPED CYLINDERS DESIGNED WITH LOW-FRICTION TECHNOLOGY: The friction between the sleeve and piston is normally mechanical and through steel rings. This causes a risk of seizing up over time.
- INTAKE AND EXHAUST MUFFLERS: Two mufflers, on the intake and exhaust, reduce the noise to xx dB.
- AUTOMATIC LUBRICATION SYSTEM: The lubrication system on the PH50 power hammer features a completely transparent tank next to the power switch to monitor the level of oil in the container without having to use uncomfortable inspection peepholes.
- DOUBLE MECHANICAL STOP PROTECTION: The piston on the front and pedal become completely mechanically blocked in an ideal position to easily and safely change the molds.
- COLLECTING AND FILTERING OIL FROM THE AIR: The Nargesa PH50 drop hammer has a tank that collects this mix and separates the two components.
- SAFETY. CE MARKING: All of our machines are compliant with EC industrial machinery manufacturing standards.
Included accesories
Standard flat mold for Power Hammer PH50
REF: 140-14-04-00001
All our Power-hammers are equipped with an upper standard flat tooling and lower one.
This tooling is the most versatile one.
Molds manufactured and tempered in 1.2344 steel / AFNOR: Z40CDV5 / DIN: X40CrMoV5-1 / UNE: F5318 / AISI: SAE H13 / SKD61 / 45Cr5MoSiV1 to withstand major impacts and high temperatures.
Standard tool
Nº of pieces: 2
Dimensions: 120x78mm
Support braces/ adaptors for Power Hammer PH50
REF: 140-14-04-00002
We supply two sets of Support braces along with the power hammer PH50.
These adaptors enable us to weld or fasten with bolts to them several kinds of elements, such as round and square solid bars, flat bars, rods etc… in order to manufacture our own tools.
Tools made of Steel F111.
Standard tool
Nº of pieces: 4
Dimensions: 120x89mm
Info
In order to have an optimal result in the different jobs, it is very important to have a good temperature in the part to be molded. Improve malleability, reduce resistance, prevent brittleness and improve stress distribution and fluidity. These aspects are essential during the deformation of metals. The Nargesa H1, H2 and H3 furnaces are manufactured to reach these high temperatures to accomplish a correct work. In addition, the new Nargesa PV21 Hydraulic Forging Press will allow you to hot-form materials, shape and manipulate metal efficiently and with impressive precision, such as for preparing Damascus for subsequent forging with the PH50 Nargesa hammer.
Dimensions
Dimensions of the machine: 808x1289x1768mm
Weight: 1002 Kg.
Tariff Item Code: 84621990
Other features:
- The machine is delivered completely assembled.
Characteristics of the packaging Power Hammer PH50
Nº Pallets: 1
Width: 950 mm.
Length: 1430 mm.
Height: 1920 mm.
Volume: 2,60 m3
Nett Weight: 1002 Kg.
Gross Weight: 1088 Kg.
Tariff Item Code: 84621990
Other Features:
- The machine is delivered completely assembled.
- Packing with wooden pallet and retractile film.
- Optional: Complete wooden packaging NIMF15.
Uses
The Nargesa PH50 Power Hammer is an essential machine for the metal sector, both for artistic forging and ornamental forging. It allows you to create decorative and functional pieces, with very diverse applications: Manufacture of knives, swords, tools for the restoration of antique furniture, windows, doors, restoration of ancient transport systems such as wagons, train cars, boats, manufacturing of bars, garden accessories such as flowerpots or outdoor furniture, arrowheads or spearheads to decorate wrought steel bars or portals, ornamental chandeliers, wrought iron fences, vintage bed headboards, decorative wrought iron coat racks, metal furniture, frames of mirrors, stretched tips for scrolls, vintage wrought iron lamps, legs for wrought tables, chair backs, bars, ornamental wrought railings, metal doors and windows, ornaments for fences, flower pots, pergolas and wrought sculptures.
Technical documentation: Manuals or product documents are available for this model.
Prodotti correlati
End Hot Wrought Iron Machine NF70
Nargesa NF70 forges arrow and baluster ends with precision on various profiles. Versatile, robust, and CE-certified for ...
Prezzo su richiesta
End Hot Wrought Iron Machine PC16
The NARGESA PC16 hot wrought machine shapes snail-end designs on round, square, and flat bars, ideal for decorative meta...
Prezzo su richiesta
Gas forge H1
NEW Nargesa H1 Furnace: Efficient, safe, eco-friendly. Consumes 75% less gas, heats over 1300ºC, ideal for artistic forg...
Prezzo su richiesta
Gas forge H2
NEW Nargesa H2 Furnace: Efficient, safe, eco-friendly. Consumes 75% less gas, heats over 1300ºC, ideal for artistic forg...
Prezzo su richiesta
Gas forge H3
NEW Nargesa H3 Furnace: Efficient, safe, eco-friendly. Consumes 75% less gas, heats over 1300ºC, ideal for forging, mold...
Prezzo su richiesta
Hot Forging Press PV21
La Prensa hidráulica para forja PV21 es mas fácil de utilizar, precisa, silenciosa y segura, líder entre todas las opcio...
Prezzo su richiesta