Non-mandrel tube and pipe bender CC60 CNC

ESA S820 CONTROL PANEL

Nargesa tube and pipes benders are controlled with a very intuitive and easy-to-use 7” color touchscreen with the latest 4.0 technology. Just enter the pipe dimensions, thickness, angle of the curve or curves and choose a die from the library and the control programs the rest of the parameters automatically; elastic recovery correction (springback), recommended rotation speed, whether a tool post support is necessary or not, and if the intended curve is possible... All of this may be modified by the end user based on their own needs. These are some of the most relevant features of this control system.

• Stores up to 10,000 programs. 
• Up to 50 different angles on the same piece can be programmed.
• Dimensions may be programmed in inches or millimetres. 
• A library of available dies with the possibility of programming new ones. 
• A library of differently shaped pipes with varying thicknesses.
• The CNC can be supplied in more than 20 different languages.
• Automatic or manual rotation speed adjustment from 0.7 to 4.5 rpm. 
• Manual or automatic operation.
• Automatic elastic recovery correction (springback).
• Piece counter.
• Independent correction of the programmable final curve degree. 
• 4.0 Technology.
• On-screen alarm diagnostics.
• Preventive maintenance warning. 
• Can be remotely connected by the manufacturer without having to travel to the machine site.
• Warning on screen if the tool post support needs to be used.
• 7” LCD colour touch-screen with 800 x 480 resolution.
• Silicon disk 512MB – Micro SD 4GB for retained data
• 3 analogue inputs, 0-10V - 12 bit resolution.
• 2 analogue outputs, 0-10V - 12 bit resolution.
• 16 digital inputs (24 Vdc).
• 16 digital outputs (24 Vcc, 1,2 A max.) Protected against overloads and short circuits.
• 1 RS232 serial port.
• 1 CAN port with 9 D-Sub F connector contacts.
• 24 Vdc power source.
• 1 USB port.
• Operating temperature: +5 to +50 °C

Dimensions of the machine: 630x1000x1150 mm 24,8"x39,4"x45,3"

Weight: 365 Kg 804,7lb

Tariff Item Code:  84622600

Other features:

• A lower pallet bench to transport the machine to the worksite or storage.
• The CC60 pipe bender is sent completely assembled.

Nº Pallets: 1.

Width: 730 mm 28,7"

Length: 1100 mm 43.3"

Height: 1320 mm 52"

Volume: 1,06 m3

Nett weight: 365 Kg 804,7lb

Gross Weight: 390 Kg 859,8lb

Tariff Item Code:  84622600

Otras características:

• Palletized bench to move the machine easily to the working site or storage.
• The machine is delivered completely mounted.
• Packaging with wooden pallet and 3-layered cardboard, suitable for sea freight.
• Optional: Complete wooden packaging NIMF15.

Fixed radius bending machines are used in most branches  related to the world of metallurgy. Naval: to build all types of ducts and pipes with different shapes. For the protections and rails of yachts in stainless steel. Construction: for all types of stairs, pool railings, parking protections, gas stations, pillars, boats... Automobile: bumpers, anti-roll bars, protections and windows of "buggies"... Motorcycle: motorcycle chassis, handlebars, motorbikes and bikes parking. Furniture: Manufacture of workout machines, chairs, tables and all kinds of furniture. Agriculture: Structures for animal feeders, machinery, greenhouses... Manufacturing of heat exchangers in copper, aluminum, brass, bronze, iron, steel... especially ideal for bending coil heat exchangers.