OPTIMUM Vario lathe between centres 205 mm, distance between centres 1000 mm, DPA21 digital readout

Hardened and ground bed guideways.

Concentric rotational accuracy of the spindle nose ≤ 0.015 mm

Hardened and ground change-gear gears and shafts, mounted on precision bearings in an oil bath.

Motor protection switch (TH 4010 / TH 4010 D), lockable main switch.

Right-left rotation selectable via a control lever on the apron.

Emergency stop device with pedal actuation.

Safety handwheels with disengagement function for X and Z axes.

Precision machined and adjustable slides with tapered gibs.

Handwheels with adjustable fine graduation, division 0.04/0.02 mm

Four-compartment tool holder.

Upper slide rotation ± 90°

LED lamp integrated in the turret protection.

Coolant system.

The tailstock can be moved by ± 10 mm for taper turning.

Tailstock/barrel and handwheel with adjustable fine graduation 0.025 mm

Induction-hardened prismatic bed, precision ground, strongly reinforced, in grey cast iron.

Machine base mounted without tool compartments, only turn® screens

Lead screw mother.

Main spindle shaft in an oil bath.

Hardened and ground main spindle shaft gears.

DPA 21 digital position display.

Reduction of error percentages.

Ergonomic membrane keypad, splash protection, anti-glare display.

X, Y, Z0, Z axis reading via LED display, each axis with 8 digits.

Optical scales.

Quick-change tool holder SWH 3-E.

Tool holder 20x100 type D for square tools.

FREQUENCY CONVERTER SINAMICS G120D:

· EMC category C2 according to EN 61800-3

· Safety Integrated

· Energy saving up to 20%

· Without braking resistor

· Universal and standard connector

· Robust model in flat version (IP65)

· Simple/fast diagnostic capability via LED

· Advanced safety function (STO, SLS)

· Energy recovery, minimum network feedback

· STO - Torque safely switched off according to EN 61800-5

· SLS - Safe limited speed according to EN 61800-5