Radial drilling machine model 50/1600 mm, complete with touch screen

· Base, column, arm and head made of high-quality cast iron

· The most important features of the structure of these drilling machines are the over-dimensioned column

and the arm particularly resistant to torsion

· The arm lifting gears run in an oil bath, to ensure maximum reliability

and a low level of wear

· The orientation and positioning axes are distinguished by excellent sliding action, which makes the operator’s daily work easier

· Gear lubrication is carried out with a very reliable pump system

· The spindle slides on precision bearings

· The head slides on hardened and ground guides

· Drilling depth selectable from the display

· Electrical control panel with Schneider components

· All control elements are arranged to facilitate the work of the experienced operator and to simplify learning for new users

· Very powerful cooling circuit with tank integrated in the base

· Spindle speed with continuous variation. Spindle speed management from the display

· The quill has a sliding counterweight on guides to ensure ease of operation and maximum safety

· Drilling/tapping feed is driven by a powerful brushless motor. Feed speed management from the display

· Independent hydraulic clamping devices

· The head and the column can be locked/unlocked together or separately via display management

· Reliable centralized lubrication system for the column

· Large-size touch screen control display/panel. Anti-scratch, resistant to chemical agents. Easy and intuitive use

· Possibility to set simple drilling functions. By selecting the drill/tap diameter and the material type (steel or cast iron), the machine pre-sets spindle speed and feed speed (always adjustable by the operator). Chip breaker function. Rigid and controlled tapping function

· Conversion from mm to inches, real-time machine alarm display and integrated manual, consultable on board the machine

STANDARD EQUIPMENT

· Cooling circuit

· Cubic table

· LED lamp

· User manual

· Rack-and-pinion chuck B16 from 1 to 13 mm

· CM4-B16 taper connection

· CM3-CM2 reduction

· CM4-CM3 reduction

· Service key

· Touch screen control panel