Ring roller bender section machine MC200
Model
5No models found.
Description
Technical Features
- It's got two traction rollers. The two lower rollers are knurled and motorized to achieve a better traction.
- Safe transmision by treated and flat pinions.
- Steel treated and rectified axis.
- Diameter of axes: 40 mm.
- Useful axes length: 74 mm.
- Center distance between lower axes: 286 mm.
- Maximum capacity for bending round pipe: 2 1/2 inch or 63.5 mm.
- Max. bending capacity in round pipes: 2" 1/2 inch or 63.5 mm.
- Bending regulation by means of the upper axis which permits to make bending operations in big pipes and profiles diameters without any distortion.
- It's equipped with 9 standard rollers and washers by means of which you can make all kinds of profiles. (Square pipe, rectan-gular, solid square bar, round and rectangular, U profile, T profile, angle, flat bar, edge flat bar,…).
- Millimeter scale in the upper axis to regulate bending.
- Vertical and Horizontal working position in the same table.
- Side corrector rollers to rule the bending operation and make spiral bendings.
- Motor Power: 1,1 KW / 1,5 HP.
- Voltage supply: 3 phased 230/400 V.
- For single phased machines, request quotation.
- Rollers speed: 8 RPM.
- Lower bench palletized to easily transport the machine to the workplace or store it in case of lacking space.
- The machine is shipped fully assembled, you only need to connect it to the power supply.
- Palet made of steel and 3 layer cardboard box suitable for seafreight.
- Optional: Fumigated wooden box ISPM15.
All our products are manufactured in our facilities in Spain. The hydraulic and electronic components are completely standard and from leading European brands, with service worldwide: Rexroth, Bosch, Roquet, Schneider Electric, LG, Telemecanique, Pizzato etc...
Nargesa section bending machines capacity
In the PDF file you will see and download the bending capacity for Profile Formers. This are guidance sizes, it always depends a lot on the material hardness and quality of the pipe of profile.
Download (170.72 KB)
Included accesories
Standard rollers MC150B/MC200/MC200H
It's equipped with 9 standard pieces, by means of which the user can work all kinds of profiles. Square., rectangular pipe, solid round and square bars. U Profile, T profile, angle, flat bar, edged flat bar...
Adjustable rollers. The user may combine the setup position and it will allow bending the differentprofiles, adapting the sizes.
Steel rollers F1140 treated and rectified.
Download (983.52 KB)
Info
2 BENDING SHAPES: VERTICAL AND HORIZONTAL.
When the user has to bend any kind of profile at radius wider than 2 m or if there are height problems in the facilities, it is really uncomfortable to work vertically. We just have to tilt the work bench of the section bending machine so the bending operation is made horizontally with the help of a support or stands where we place the piece in order to obtain an optimous job. Fo isntance, when we bend archs for a grrenhouse.
Dimensions
Dimensions of the machine: 790x810x1300 mm 31.1"x31,9"x51,2"
Weight: 320 Kg 705,5lb
Tariff Item Code: 84622900
Other Features:
- Palletized bench to move the machine easily to the working site or storage.
- The machine is sent completely mounted.
Characteristics of the packaging Ring roller bender section machine MC200
Nº Pallets 1.
Width: 700 mm 27,6"
Length: 830 mm 32,7"
Height: 1380 mm 54,3"
Volume: 0,80 m3
Nett Weight: 320 Kg 705,5lb
Gross Weight: 335 Kg 738,6lb
Tariff Item Code: 84622900
Other Features:
- Palletized bench to transport it easily to the working site or storage.
- The machine is sent completely mounted.
- Packeaging with steel pallet and 3-layered cardboard box, suitable for sea freight.
- Optional: Complete wooden packaging NIMF15.
Uses
Profile Former MC200 NARGESA, manufactured in mechanized and welded steel unlike others it's not made of wrought iron. It can bend any kind of profiles: Round, square and rectangular pipes, U profiles, T profiles, angles, flat bar, edge flat bar.... Ideal for manufacturing flanges, greenhouses, handrails, tables, chairs, doors, windows... making a great number of circular shapes in all kinds of profiles. Ideal for manufacturing of heat exchangers in copper, aluminum, brass, bronze, iron, steel... especially for bending coil heat exchangers.
Technical documentation: Manuals or product documents are available for this model.
Available Variants
5| Product | Model | Price | Stock | Quantity | Action |
|---|---|---|---|---|---|
Ring roller bender section machine MC150B
Code: MC150B
Model
MC150B
|
MC150B
|
Price on request | Availability to be confirmed |
|
|
Ring roller bender section machine MC200
Code: MC200
Current
Model
MC200
|
MC200
|
Price on request | Availability to be confirmed |
|
|
Profile bending machines MC400
Code: MC400
Model
MC400
|
MC400
|
Price on request | Availability to be confirmed |
|
|
MC550 section and tube bending machine
Code: MC550
Model
MC550
|
MC550
|
Price on request | Availability to be confirmed |
|
|
MC650 section and pipe bending machine
Code: MC650
Model
MC650
|
MC650
|
Price on request | Availability to be confirmed |
|
Related Products
Profile bending machines MC400
MC400 NARGESA tube bender, steel, 3 rolls. Perfect for flanges, railings, greenhouses. Superior precision and durability...
Price on request
Hydraulic section bending machine MC200H
Hydraulic section bending machine MC200H NARGESA, robust steel build, bends pipes up to 70mm, ideal for circular profile...
Price on request
Hydraulic Punching and Shearing Machine MX340G
MX340G NARGESA ironworker (40+ tons) offers versatile punching, folding, cutting, and inlaying on metal sheets, pipes & ...
Price on request
MC650 section and pipe bending machine
Nargesa technicians are finalizing assembly and electronics for the new MC650 section bending machine series.
Price on request
Ring roller bender section machine MC150B
A curvadora NARGESA MC150B dobra tubos e perfis (até 2"/50mm) com precisão, ideal para estruturas metálicas. Robusta, ve...
Price on request