Universal sharpening machine Beta U40R

All machines have a removable spindle to allow use of the extended spindle for flat grinding operations. The grinding head axis can rotate 360° in the horizontal plane and can be tilted by ±20° in the vertical plane.

The grinding head spindle has two ends for mounting the grinding wheel and can rotate in both directions for the “R” and “RI” versions, with the two fixed speeds, and for the “V” and “VI” versions, with a variable speed drive.

The longitudinal carriage slides on a pair of preloaded cross-roller guides, made of tempered steel, which provides a high load capacity and prevents tipping at the end of travel.

The upper table can be oriented by ±90° in the horizontal plane. The dual controls make it easier to use the machines for sharpening operations. In the “RI” and “VI” models, the hydraulic equipment gives the longitudinal carriage automatic translational movement, with speed adjustable from 0.1 to 12 m/min.

A position limiter on the speed controller allows setting a feed speed so that an instantaneous change from the stop position to the selected working speed can be performed.

On all models, it is possible to apply the horizontal control of the vertical movement.

STANDARD EQUIPMENT

2-speed electric motor;

safety devices according to CE standards;

headstock guard holder with three protective guards;

service keys;

instruction booklet;

lamp holder;

centralised lubrication.

TESTING

Carried out in compliance with SCHLESINGER standards, at our facility.